Ship Chains Exported to Argentina

YT Marine exported U3 grade 28 mm ship chains to an Argentina client, together with Kent shackles, end shackles and swivel components. The client later shared installation photos after fitting the chains on the vessel.

Our Argentina client was very satisfied with the product quality and later shared installation photos after fitting the chains on the vessel.

This project included U3 grade ship chains with a 28 mm diameter, 28 pieces in total. The shipment also included Kent shackles, end shackles and swivel components for the complete chain assembly.

Below are some project photos shared from this shipment and installation.

For the same client, we have also exported fiberglass grating several times for marine deck and vessel applications.

Ready to Start Your Marine Project?

Send us your drawings, specifications or project requirements — our team will review the details and get back to you within 24 hours.

Lucy Liu

Hi, I’m Lucy Liu, founder of ytmarinefender.com. We manufacture and customize marine fender systems, tugboat fenders, EVA boat and yacht fenders, and related rubber products for dock, port, shipyard and marine applications. I share product knowledge, project experience and practical insights to help buyers choose suitable marine protection and mooring solutions. Email: sales@yutungindustrial.com WhatsApp: +86 13962947398

Get a Quote for Your Marine Project

We typically respond within 24 hours.

• Custom marine fender solutions
• Consistent quality control
• Fast response within 24 hours

Solutions

Explore Marine Products

Explore Our Marine Products

Browse our marine products including rubber fenders, foam filled fenders, marine airbags, mooring anchors, chains, gratings and other equipment for dock, port, shipyard and vessel applications.

Pneumatic Rubber Fender

Foam Filled Fenders & Buoys

Marine Airbags

Tugboat Fenders

Shipside Bow Fenders

Cylindrical Fenders

Arch Fenders

D Type Fenders

W Type Fenders

Cell Fenders

Cone Fenders

Wheel Fenders

GD Fenders

Square Fenders

Rubber Seals

Fender Panels

Mooring Chains

Mooring Anchors

FRP/GRP Grating

Steel Grating

Related Marine Projects

Explore real-world marine projects involving fenders, chains, anchors and deck equipment for docks, ports, shipyards and vessels.

16 mm Studless Anchor Chain for Australian Ship Project

YT Marine manufactured 16 mm studless anchor chains for an Australian client. The chains were hot-dip galvanized, provided with mill certificates, and ordered together with D-type rubber fenders for ship use.

Custom Towing Ring for Sling Type Pneumatic Fender

YT Marine manufactured a custom F.C.1 towing ring for a sling type pneumatic fender. The towing ring was made according to the client’s drawing and used at the end of the pneumatic fender, connecting with shackles, swivels, mooring chains or ropes.

H40 aircraft tyres for pneumatic fender tire-chain net systems

H40 Used Aircraft Tyre Fenders for Australian Client

12 pcs H40 used aircraft tyre fenders were prepared for an Australian client, with 1050 mm tyre diameter and four 100 mm drilled holes for pneumatic rubber fender tyre-chain net assembly.

60 mm Custom U-Rings for French Polynesia Client

YT Marine manufactured 5 pcs of 60 mm custom U-rings for a long-term client in French Polynesia. The U-rings were produced according to the client’s drawing, with material and inspection reports provided before delivery to the Shanghai Port warehouse.

Drawing of cylindrical rubber fenders with galvanized chain links and central support bar assembly

Cylindrical Rubber Fenders & Galvanized Accessories for Singapore

A Singapore customer ordered cylindrical rubber fenders, galvanized chain links, dee shackles and central support bars for a marine fender installation project, all produced according to the customer’s drawing.

500 × 1000 mm foam fenders for boats with rope net

Foam Fenders for Boats with Rope Net for Europe Client

YT Marine manufactured 100 pcs of 500 × 1000 mm black foam fenders for boats for a Europe client. The fenders were fitted with 10 mm rope nets, packed in one 20′ container and wrapped with protection film outside the rope net.

Custom Square Rubber Fenders and SUC500H Cell Fenders for El Salvador Client

YT Marine manufactured 568 pcs of custom 250 × 250 × 4000L mm square rubber fenders and 166 pcs of SUC500H cell fenders for a new client in El Salvador. The project included drawing review, mold modification, performance confirmation, quality inspection and shipment in 10 × 20GP containers.

Foam Boat Fenders Exported to Holland

YT Marine manufactured 500 × 1000 mm black foam boat fenders for a long-term client in Holland. We first met the client at Europort Rotterdam and have continued cooperation for five years with repeat orders.

Industry Insights

Read practical guides and product insights about marine fenders, mooring products and deck equipment.

Ship W fender for tugboat and vessel side protection

Ship W Fender for Tugboats, Workboats and Vessel Side Protection

YT Marine manufactures ship W fenders for tugboats, workboats and vessel side protection. W fenders are molded rubber profiles made from marine rubber material, with available specifications selected according to vessel layout and installation requirements.

Baby pneumatic fender for small boat and dock protection

Baby Pneumatic Fender for Small Boats, Docks and Marine Protection

YT Marine manufactures baby pneumatic fenders for small boats, docks, pontoons, marinas and light marine protection applications. Small sizes, sling type options, rubber material and inflation details can be reviewed according to project requirements.