16 mm Studless Anchor Chain for Australian Ship Project

YT Marine manufactured 16 mm studless anchor chains for an Australian client. The chains were hot-dip galvanized, provided with mill certificates, and ordered together with D-type rubber fenders for ship use.

Project Overview

YT Marine manufactured 16 mm studless anchor chains for an Australian client.

This project was ordered together with D-type rubber fenders. The anchor chains and rubber fenders were prepared for ship use according to the client’s project requirements.

Anchor Chain Specification

The anchor chain diameter was 16 mm. The chain type was studless link anchor chain, and the surface treatment was hot-dip galvanization for corrosion protection in marine environments.

Certificate and Surface Treatment

Mill certificates were provided for this order according to the client’s requirement.

The hot-dip galvanized surface helps improve corrosion resistance and makes the chains more suitable for marine and ship applications.

Chain Grade Options

Our factory can manufacture anchor chains in different sizes and grades for ship and marine applications.

For anchor chain grades, we can manufacture Grade 2 and Grade 3 anchor chains. The maximum anchor chain diameter can be close to 60 mm, depending on the required chain type, grade and certificate.

Classification society certificates such as CCS, LR, DNV and ABS can also be provided when required.

Project Photos

Below are project photos of the 16 mm hot-dip galvanized studless anchor chains prepared for this Australian client.

16 mm studless anchor chain for ship use

Related Product

Related Product: Anchor Chains
https://ytmarinefender.com/anchor-chain/

Ready to Start Your Marine Project?

Send us your drawings, specifications or project requirements — our team will review the details and get back to you within 24 hours.

Lucy Liu

Hi, I’m Lucy Liu, founder of ytmarinefender.com. We manufacture and customize marine fender systems, tugboat fenders, EVA boat and yacht fenders, and related rubber products for dock, port, shipyard and marine applications. I share product knowledge, project experience and practical insights to help buyers choose suitable marine protection and mooring solutions. Email: sales@yutungindustrial.com WhatsApp: +86 13962947398

Get a Quote for Your Marine Project

We typically respond within 24 hours.

• Custom marine fender solutions
• Consistent quality control
• Fast response within 24 hours

Solutions

Explore Marine Products

Explore Our Marine Products

Browse our marine products including rubber fenders, foam filled fenders, marine airbags, mooring anchors, chains, gratings and other equipment for dock, port, shipyard and vessel applications.

Pneumatic Rubber Fender

Foam Filled Fenders & Buoys

Marine Airbags

Tugboat Fenders

Shipside Bow Fenders

Cylindrical Fenders

Arch Fenders

D Type Fenders

W Type Fenders

Cell Fenders

Cone Fenders

Wheel Fenders

GD Fenders

Square Fenders

Rubber Seals

Fender Panels

Mooring Chains

Mooring Anchors

FRP/GRP Grating

Steel Grating

Related Marine Projects

Explore real-world marine projects involving fenders, chains, anchors and deck equipment for docks, ports, shipyards and vessels.

Custom Square Rubber Fenders and SUC500H Cell Fenders for El Salvador Client

YT Marine manufactured 568 pcs of custom 250 × 250 × 4000L mm square rubber fenders and 166 pcs of SUC500H cell fenders for a new client in El Salvador. The project included drawing review, mold modification, performance confirmation, quality inspection and shipment in 10 × 20GP containers.

150 kg Hall Type Stockless Anchor for Malaysia Client

YT Marine manufactured 3 pcs of 150 kg C-type Hall type stockless anchors for a repeat Malaysia client. The anchors were hot-dip galvanized, packed on pallets and provided with CCS certificates.

SA-B500 × 3000 mm Arch Rubber Fenders for Indonesia Client

YT Marine manufactured 3 pcs of SA-B500 × 3000 mm Type B arch rubber fenders for a new Indonesia client. The fenders were fitted with blue UHMWPE face pads and SS304 anchor bolts, with drawings approved before production.

Ship Chains Exported to Argentina

YT Marine exported U3 grade 28 mm ship chains to an Argentina client, together with Kent shackles, end shackles and swivel components. The client later shared installation photos after fitting the chains on the vessel.

Ship Launching Airbags for Malaysia Shipyard

YT Marine manufactured ship launching airbags for a Malaysia shipyard project. Each marine airbag was tested before delivery, and the batch was prepared with production and inspection photos for client review.

Pneumatic Marine Fender for Bangladesh Navy

YT Marine manufactured 500 × 3000 mm pneumatic marine fenders for a Bangladesh Navy repair project involving 18 ships at a port in China. The project included tire-chain net accessories, shackles, swivels, towing rings and air charging accessories.

Large Foam Dock Bumpers for Korea Shipyard

YT Marine manufactured large foam dock bumpers for a Korea shipyard project. The foam fenders were made in 3.3 m × 6.5 m size, with EVA closed-cell foam cores and anti-UV, anti-seawater SPUA coating.

H40 aircraft tyres for pneumatic fender tire-chain net systems

H40 Used Aircraft Tyre Fenders for Australian Client

12 pcs H40 used aircraft tyre fenders were prepared for an Australian client, with 1050 mm tyre diameter and four 100 mm drilled holes for pneumatic rubber fender tyre-chain net assembly.

Industry Insights

Read practical guides and product insights about marine fenders, mooring products and deck equipment.

GD Fender for Port, Ship and Dock Protection

YT Marine manufactures GD fenders for ports, ships, docks and marine structures. Available mold sizes, fender length, rubber material, hole position and installation details can be selected according to project requirements.

Why ISO 17357 Matters When Buying Pneumatic Fenders

Learn why ISO 17357 is widely specified in pneumatic fender projects and how international buyers evaluate specification compliance, consistency, delivery reliability and complete supply capability.

Arch Dock Fender for Marine Berthing Protection

YT Marine manufactures arch dock fenders for docks, ports, jetties and berthing structures. Available mold sizes, different lengths, UHMWPE wear pads and project drawings can be reviewed according to installation requirements.

EPDM extrusions for shipyard sealing applications

Application of EPDM Extrusions in Shipyards

EPDM extrusions are used in shipyards for door and window seals, hatch cover seals, pipeline sealing, vibration pads, cable protection and deck safety components. YT Marine provides custom rubber extrusion support for marine and shipyard applications.

Anchor Chain for Ships: 14 mm Studless Chain for Marine Use

YT Marine provides anchor chains for ships, including studless and stud link chains in different grades, diameters and surface treatments. This case features a 14 mm hot-dip galvanized studless anchor chain ordered by an Australian customer together with D-type rubber fenders.