Foam Boat Fenders Exported to Holland

YT Marine manufactured 500 × 1000 mm black foam boat fenders for a long-term client in Holland. We first met the client at Europort Rotterdam and have continued cooperation for five years with repeat orders.

In the past five years, we have exported foam boat fenders to a long-term client in Holland.

We first met this client at the Europort Rotterdam exhibition. During the early stage of cooperation, we made several corrections and improvements based on their feedback. After that, the cooperation became stable, and the client continued to place repeat orders.

The client usually orders 500 × 1000 mm black foam boat fenders. Each 20′ container uses the same chamfered fender body shape, which helps keep the installation and appearance consistent.

These foam boat fenders have black anti-seawater SPUA coating on the outside and EVA foam cores inside. The structure provides good energy absorption and is suitable for long-term use in marine environments.

Below are some photos from the production and inspection process.

Black foam boat fenders for Holland client

Black foam fender with chamfered body shape

Black marine foam fenders prepared for shipment

Custom foam boat fenders for long-term client in Holland

Foam Filled Fenders

Ready to Start Your Marine Project?

Send us your drawings, specifications or project requirements — our team will review the details and get back to you within 24 hours.

Lucy Liu

Hi, I’m Lucy Liu, founder of ytmarinefender.com. We manufacture and customize marine fender systems, tugboat fenders, EVA boat and yacht fenders, and related rubber products for dock, port, shipyard and marine applications. I share product knowledge, project experience and practical insights to help buyers choose suitable marine protection and mooring solutions. Email: sales@yutungindustrial.com WhatsApp: +86 13962947398

Get a Quote for Your Marine Project

We typically respond within 24 hours.

• Custom marine fender solutions
• Consistent quality control
• Fast response within 24 hours

Solutions

Explore Marine Products

Explore Our Marine Products

Browse our marine products including rubber fenders, foam filled fenders, marine airbags, mooring anchors, chains, gratings and other equipment for dock, port, shipyard and vessel applications.

Pneumatic Rubber Fender

Foam Filled Fenders & Buoys

Marine Airbags

Tugboat Fenders

Shipside Bow Fenders

Cylindrical Fenders

Arch Fenders

D Type Fenders

W Type Fenders

Cell Fenders

Cone Fenders

Wheel Fenders

GD Fenders

Square Fenders

Rubber Seals

Fender Panels

Mooring Chains

Mooring Anchors

FRP/GRP Grating

Steel Grating

Related Marine Projects

Explore real-world marine projects involving fenders, chains, anchors and deck equipment for docks, ports, shipyards and vessels.

500 × 1000 mm foam fenders for boats with rope net

Foam Fenders for Boats with Rope Net for Europe Client

YT Marine manufactured 100 pcs of 500 × 1000 mm black foam fenders for boats for a Europe client. The fenders were fitted with 10 mm rope nets, packed in one 20′ container and wrapped with protection film outside the rope net.

Custom ship side bow fenders for Bangladesh Navy

Custom Bow Fenders for Bangladesh Navy

YT Marine manufactured custom ship side bow fenders for a Bangladesh Navy project involving six ships. The fenders used 60–70 kg/m³ foam density and were installed with 50 × 50 mm aluminium channels.

D Rubber Fender, Anchor Chains and Swivels for Australian Client

YT Marine delivered D200 rubber fenders, 14 mm and 16 mm studless anchor chains, 10 mm and 13 mm chain connectors, and 20T swivels for a repeat Australian client. All chains, connectors and swivels were hot-dip galvanized and packed in pallets and wooden cases.

W470 × 350 × 350 mm Custom W Rubber Fender for Vietnam Client

YT Marine manufactured a custom W470 × 350 × 350 mm W rubber fender for a new Vietnamese client. The fender was produced according to the client’s drawing, completed within 20 days and shipped by LCL sea freight.

SA-B500 × 3000 mm Arch Rubber Fenders for Indonesia Client

YT Marine manufactured 3 pcs of SA-B500 × 3000 mm Type B arch rubber fenders for a new Indonesia client. The fenders were fitted with blue UHMWPE face pads and SS304 anchor bolts, with drawings approved before production.

16 mm Studless Anchor Chain for Australian Ship Project

YT Marine manufactured 16 mm studless anchor chains for an Australian client. The chains were hot-dip galvanized, provided with mill certificates, and ordered together with D-type rubber fenders for ship use.

Green anti-skid fiberglass grating for Argentina project

Fiberglass Grating, Anchor and Chain Exported to Argentina

YT Marine shipped green anti-skid fiberglass grating, AC-14 anchors and U2 anchor chains to a long-term client in Buenos Aires, Argentina. This was the fifth batch ordered by the client within three years.

150 kg Hall Type Stockless Anchor for Malaysia Client

YT Marine manufactured 3 pcs of 150 kg C-type Hall type stockless anchors for a repeat Malaysia client. The anchors were hot-dip galvanized, packed on pallets and provided with CCS certificates.

Industry Insights

Read practical guides and product insights about marine fenders, mooring products and deck equipment.

Square Fender with Inner Hole

Square rubber fenders with inner holes are used for dock, vessel and marine protection applications where simple installation, flexible compression and edge protection are required. Different inner hole shapes and UHMWPE pad options can be customized according to project requirements.