Custom Towing Ring for Sling Type Pneumatic Fender

YT Marine manufactured a custom F.C.1 towing ring for a sling type pneumatic fender. The towing ring was made according to the client’s drawing and used at the end of the pneumatic fender, connecting with shackles, swivels, mooring chains or ropes.

Product: Custom Towing Ring for Sling Type Pneumatic Fender

Model / Size: F.C.1, Custom Made to Client Drawing

Market: Australia

Application: Pneumatic Fender Mooring and Towing Connection

YT Marine manufactured a custom F.C.1 towing ring for a sling type pneumatic fender.

For this project, the client sent us the drawing, and we manufactured the towing ring according to their required design and dimensions.

The towing ring is used at the end of a pneumatic fender. It works as an important connection part for hanging or fixing the fender to a port, dock, ship or other marine structure.

During installation, the pneumatic fender can be connected with a mooring chain or mooring rope through the towing ring. Shackles and swivels are usually used between the sling chain or rope and the towing ring, helping the connection stay flexible during berthing and fender movement.

Below are project photos of the custom towing ring, swivel, pneumatic fender and related connection details.

Project Photos

Custom towing ring manufactured according to client drawing

Towing Ring Type

It is F.C.1. towing ring, client sent us the drawing for manufacture.

Application for Pneumatic Fender

It is used for the end of pneumatic fender.

Can use the mooring chain or mooring rope to hang the pneumatic fender to the port or ship for bumping use.

Between the sling chain or rope with the towing ring, there is shackle and swivel in the middle.

Fender Connection Details

Fender towing ring for sling type pneumatic fender

Shackle and swivel connection for pneumatic fender towing ring

Pneumatic fender end fitting with towing ring

Ready to Start Your Marine Project?

Send us your drawings, specifications or project requirements — our team will review the details and get back to you within 24 hours.

Lucy Liu

Hi, I’m Lucy Liu, founder of ytmarinefender.com. We manufacture and customize marine fender systems, tugboat fenders, EVA boat and yacht fenders, and related rubber products for dock, port, shipyard and marine applications. I share product knowledge, project experience and practical insights to help buyers choose suitable marine protection and mooring solutions. Email: sales@yutungindustrial.com WhatsApp: +86 13962947398

Get a Quote for Your Marine Project

We typically respond within 24 hours.

• Custom marine fender solutions
• Consistent quality control
• Fast response within 24 hours

Solutions

Explore Marine Products

Explore Our Marine Products

Browse our marine products including rubber fenders, foam filled fenders, marine airbags, mooring anchors, chains, gratings and other equipment for dock, port, shipyard and vessel applications.

Pneumatic Rubber Fender

Foam Filled Fenders & Buoys

Marine Airbags

Tugboat Fenders

Shipside Bow Fenders

Cylindrical Fenders

Arch Fenders

D Type Fenders

W Type Fenders

Cell Fenders

Cone Fenders

Wheel Fenders

GD Fenders

Square Fenders

Rubber Seals

Fender Panels

Mooring Chains

Mooring Anchors

FRP/GRP Grating

Steel Grating

Related Marine Projects

Explore real-world marine projects involving fenders, chains, anchors and deck equipment for docks, ports, shipyards and vessels.

Large Foam Dock Bumpers for Korea Shipyard

YT Marine manufactured large foam dock bumpers for a Korea shipyard project. The foam fenders were made in 3.3 m × 6.5 m size, with EVA closed-cell foam cores and anti-UV, anti-seawater SPUA coating.

Ship Chains Exported to Argentina

YT Marine exported U3 grade 28 mm ship chains to an Argentina client, together with Kent shackles, end shackles and swivel components. The client later shared installation photos after fitting the chains on the vessel.

Custom ship side bow fenders for Bangladesh Navy

Custom Bow Fenders for Bangladesh Navy

YT Marine manufactured custom ship side bow fenders for a Bangladesh Navy project involving six ships. The fenders used 60–70 kg/m³ foam density and were installed with 50 × 50 mm aluminium channels.

D200 × 200 × 650 mm rubber D fender for Australian client

D200 × 200 × 650 mm D Fender for Australian Repeat Client

YT Marine manufactured 15 pcs of D200 × 200 × 650 mm rubber D fenders for a repeat Australian client. The fenders were made from natural rubber and packed on plywood pallets for ocean shipment.

700 × 1500 mm Foam Filled Fenders for Panama Client

YT Marine manufactured 2 pcs of 700 × 1500 mm black foam filled fenders for a Panama client. The project included drawing confirmation, dimension inspection photos, swivel and shackle accessories, and protection film before delivery.

SA500 × 2500 mm Arch Fenders for Spain Client

YT Marine manufactured 8 pcs of SA500 × 2500 mm Type A arch fenders for a new Spain client. The fenders used M36 anchor fixing holes according to the client’s request and were delivered with anchor bolts for existing concrete installation.

500 × 1000 mm foam fenders for boats with rope net

Foam Fenders for Boats with Rope Net for Europe Client

YT Marine manufactured 100 pcs of 500 × 1000 mm black foam fenders for boats for a Europe client. The fenders were fitted with 10 mm rope nets, packed in one 20′ container and wrapped with protection film outside the rope net.

EVA SPUA boat bow fender wrapped with protective film

Custom EVA SPUA Boat Bow Fenders for an Indonesia Shipyard

A custom EVA and SPUA coated boat bow fender project for an Indonesia shipyard, including one CY400 foam bow fender and D150 foam D fenders with through holes for easier installation.

Industry Insights

Read practical guides and product insights about marine fenders, mooring products and deck equipment.

rubber fenders installed on a port berth quay wall for dock protection

Why Fender and Bollard Layout Matters in Berth Design

Marine fenders and bollards are often specified separately, but their performance is closely connected. Proper coordination can reduce installation issues, improve compatibility, and simplify long-term maintenance.

Hall type stockless marine anchors for boat dock pontoon and mooring systems

Hall-Type Stockless Anchors: Reliable Solutions for Modern Vessels

Hall-type stockless anchors provide a balance of holding strength and operational convenience for commercial vessels and offshore ships. YT Marine’s project verification ensures safe installation and reliable anchoring performance.

Pneumatic rubber fenders used for dock berthing and vessel protection

Why Hardware Compatibility Matters in Pneumatic Fender Systems

Standard marine hardware may meet individual specifications, but compatibility issues can still arise in pneumatic fender systems. Learn why towing rings, shackles, swivels and chains should be evaluated as a complete assembly and how custom end fittings help ensure reliable installation.

Why YT Marine Uses New Rubber Material for Fender Manufacturing

YT Marine uses new rubber material for marine fender manufacturing to improve durability, elasticity, aging resistance and service life. Learn why rubber quality matters when comparing fender prices.

D Fender for Boats: D200 × 200 × 650 mm Rubber Fender for Australian Customer

YT Marine produced D200 × 200 × 650 mm rubber D fenders for a regular Australian customer. The width and height are fixed by mold, while the length and drilling options can be adjusted according to installation requirements.

Segmented W rubber fenders installed along curved vessel side

W Fender vs D Fender: Which Is Better for Tugboats?

W fenders and D fenders are among the most common tugboat fender systems. Discover their key differences, applications, and how to select the right solution for your vessel.

EPDM extrusions for shipyard sealing applications

Application of EPDM Extrusions in Shipyards

EPDM extrusions are used in shipyards for door and window seals, hatch cover seals, pipeline sealing, vibration pads, cable protection and deck safety components. YT Marine provides custom rubber extrusion support for marine and shipyard applications.

Drawing of cylindrical rubber fenders with galvanized chain links and central support bar assembly

Why Cylindrical Rubber Fenders Remain a Popular Choice for Shipyards

Discover why cylindrical rubber fenders remain one of the most widely used marine fender systems for shipyards, dry docks and floating docks. This article explains their advantages, common applications and key selection factors, while highlighting a recent cylindrical rubber fender project supplied by YT Marine in Singapore.