Yokohama Pneumatic Fenders for Onne Port, Nigeria

YT Marine manufactured Yokohama pneumatic fenders for Onne Port, Nigeria, including 3.3 m × 6.5 m and 1.2 m × 3 m sizes. The fenders were fitted with aircraft tire-chain nets, 50 kPa internal pressure and ISO 17357:2014 standard.

YT Marine manufactured Yokohama pneumatic fenders for Onne Port, Nigeria.

This project included two batches of pneumatic fenders. The first batch included 6 pcs of 3.3 m × 6.5 m fenders, and the second batch included 3 pcs of 1.2 m × 3 m fenders. This was a repeat order from our client.

The fenders were made with aircraft tire-chain nets and 50 kPa internal pressure. They were manufactured according to ISO 17357:2014 requirements for pneumatic rubber fenders.

Before shipment, the large fenders were deflated and prepared for container loading in our workshop. Some accessories, including shackles and swivels, were also packed together for the tire-chain net assembly.

Below are project photos showing the pneumatic fenders, tire-chain net accessories and container loading process for this Nigeria project.

Container Loading Photos of Yokohama Pneumatic Fenders

Yokohama pneumatic fender container loading

Pneumatic fenders loaded in container for Nigeria project

Ready to Start Your Marine Project?

Send us your drawings, specifications or project requirements — our team will review the details and get back to you within 24 hours.

Lucy Liu

Hi, I’m Lucy Liu, founder of ytmarinefender.com. We manufacture and customize marine fender systems, tugboat fenders, EVA boat and yacht fenders, and related rubber products for dock, port, shipyard and marine applications. I share product knowledge, project experience and practical insights to help buyers choose suitable marine protection and mooring solutions. Email: sales@yutungindustrial.com WhatsApp: +86 13962947398

Get a Quote for Your Marine Project

We typically respond within 24 hours.

• Custom marine fender solutions
• Consistent quality control
• Fast response within 24 hours

Solutions

Explore Marine Products

Explore Our Marine Products

Browse our marine products including rubber fenders, foam filled fenders, marine airbags, mooring anchors, chains, gratings and other equipment for dock, port, shipyard and vessel applications.

Pneumatic Rubber Fender

Foam Filled Fenders & Buoys

Marine Airbags

Tugboat Fenders

Shipside Bow Fenders

Cylindrical Fenders

Arch Fenders

D Type Fenders

W Type Fenders

Cell Fenders

Cone Fenders

Wheel Fenders

GD Fenders

Square Fenders

Rubber Seals

Fender Panels

Mooring Chains

Mooring Anchors

FRP/GRP Grating

Steel Grating

Related Marine Projects

Explore real-world marine projects involving fenders, chains, anchors and deck equipment for docks, ports, shipyards and vessels.

500 × 1000 mm foam fenders for boats with rope net

Foam Fenders for Boats with Rope Net for Europe Client

YT Marine manufactured 100 pcs of 500 × 1000 mm black foam fenders for boats for a Europe client. The fenders were fitted with 10 mm rope nets, packed in one 20′ container and wrapped with protection film outside the rope net.

H40 Used Aircraft Tyre Fenders for Australian Client

12 pcs H40 used aircraft tyre fenders were prepared for an Australian client, with 1050 mm tyre diameter and four 100 mm drilled holes for pneumatic rubber fender tyre-chain net assembly.

D Rubber Fender, Anchor Chains and Swivels for Australian Client

YT Marine delivered D200 rubber fenders, 14 mm and 16 mm studless anchor chains, 10 mm and 13 mm chain connectors, and 20T swivels for a repeat Australian client. All chains, connectors and swivels were hot-dip galvanized and packed in pallets and wooden cases.

W470 × 350 × 350 mm Custom W Rubber Fender for Vietnam Client

YT Marine manufactured a custom W470 × 350 × 350 mm W rubber fender for a new Vietnamese client. The fender was produced according to the client’s drawing, completed within 20 days and shipped by LCL sea freight.

700 × 1500 mm Foam Filled Fenders for Panama Client

YT Marine manufactured 2 pcs of 700 × 1500 mm black foam filled fenders for a Panama client. The project included drawing confirmation, dimension inspection photos, swivel and shackle accessories, and protection film before delivery.

Pneumatic Marine Fender for Bangladesh Navy

YT Marine manufactured 500 × 3000 mm pneumatic marine fenders for a Bangladesh Navy repair project involving 18 ships at a port in China. The project included tire-chain net accessories, shackles, swivels, towing rings and air charging accessories.

Foam Boat Fenders Exported to Holland

YT Marine manufactured 500 × 1000 mm black foam boat fenders for a long-term client in Holland. We first met the client at Europort Rotterdam and have continued cooperation for five years with repeat orders.

150 kg Hall Type Stockless Anchor for Malaysia Client

YT Marine manufactured 3 pcs of 150 kg C-type Hall type stockless anchors for a repeat Malaysia client. The anchors were hot-dip galvanized, packed on pallets and provided with CCS certificates.

Industry Insights

Read practical guides and product insights about marine fenders, mooring products and deck equipment.

GRP Grating Manufacturer for Marine Flooring and Floating Jetty Applications

YT Marine manufactures GRP and FRP grating panels for marine flooring, floating jetties, shipyard walkways and dock platforms. Anti-slip surfaces, custom colors and different panel heights are available for project requirements.

Anchor Chain for Ships: 14 mm Studless Chain for Marine Use

YT Marine provides anchor chains for ships, including studless and stud link chains in different grades, diameters and surface treatments. This case features a 14 mm hot-dip galvanized studless anchor chain ordered by an Australian customer together with D-type rubber fenders.